Mono Switch Housing w 1 Carlingtech Switch – Exterior


Pro-Series Mono Snap-in housing with 1 Operator switch pre-installed and custom labels. Bright Red and Green for exterior use
Switch and Housing assembly alone, connecting cables not included.

1 Year Warranty


• Easy, Snap-in unified switch and housing assembly
• Only 1 cutout needed for a multi switch housing
• Housing ensures perfect inter-switch alignment
• Space-saver design increases mounting freedom
• Distinctive, elegant appearance and styling
• Versatile – mounts on wide range of panel thickness and materials
• IP 66 compliant
• Closed cell gasket seal on each switch
• Custom labels
• Available in Single (Mono) up to 5 Switch (Penta) housing
• Housings maintain matching style
• RoHS and Lead Free compliant

Tech Data


• Illumination: Internal Bright RED and Bright GREEN LEDs
• Mounting: Switch comes preinstalled in flush-mount, snap-in housing
• Switch Type: Momentary contact rocker with custom PCB assembly
• Sealing: Switch to Housing sealed with closed cell gasket; Switch sealed with dual seals around LEDs and rocker stem
• IP rating: IP66 from front panel
• Hole cutout for snap-in housing: 0.99 inch x 1.90 inch (25.1 mm x 48.3 mm)
• Panel thickness : Min: 0.062 inch (1.57 mm) Max: 0.375 inch (9.52 mm)
• Rear clearance requirement: 1.92 Inch measured from front of panel (Housing seating surface)
• Interface: 6/4 RJ 11 socket, gold plated contacts, mounted on rear PCB assembly
• Actuator: Aesthetic symmetrically curved, black nylon
• Actuating force: 460 grams +/- 30, (4.5 N +/- 0.3)
• Actuating distance to rocker center: 20 mm
• Lens – Dual prismatic, clear polycarbonate set in rocker
• Operating life: 50,000 cycles min
• Industry certification: Switch meets MIL Std. 202F, MIL Std. 810C, UL 1500, ISO 8846, IEC 60529 and BS 5490