Drain Master 'Ultimate' Kits allow 2 valves for 2 holding tanks to be operated
from the outside and inside the RV. The kits differ only in the type and style
of switch combinations included. Switch selection is determined by its mounting
location and user preferences in operating feel and cosmetics.
Pro-Series S3VT kits are upgraded versions of the S2VT family.
S3VT valves have smaller molded style connectors and easy - routing interconnect
cables.
The 6004 is the exact but upgraded version of the kit seen on: www.rvtravel.com
with 2 Double switch panels.
Drain Master, Smart Sensing Valve Technology features a custom designed, slim
profile, waterproof IP66 on-board electronic controller which handles 12VDC
directly to the valve motor eliminating power loss regardless of the distance
from the operator switch. The electronic controller opens or closes the valve
in under a second. The movement is independent of the switch pressing time.
Using high accuracy solid state sensors and feedback the controller stops the
motor at the target position, vastly improving overall reliability and precision.
The system is reverse polarity protected and features a power-on LED. At power
up, the Green LED on the Controller lights up and the valve will home to 'safe'
closed position. The 12V power connector comes with protection seals and matching
pigtail for easy connectivity
Each Double switch panel has 2 snap action, tactile switches in Black and Gray
set in matching graphic outlines. Switches have 2 LED lights - GREEN lights
up when valve is 'Closed', RED when valve is 'Open'. The panels feature digitally
imaged graphics protected by a clear, UV and wear resistant, overlay. One Double
panel is mounted at a convenient location inside the RV and the 2nd outside
in a compartment or protected area. The valves can be operated from either location,
offering the ultimate in convenience.
The kit includes 20 Ft interface cables; custom cable lengths are available.
The cables connect the switches to controller ports on the respective valve.
The small diameter interface cable is very easily routed. The controller, connectors
and interface cables are waterproof (IP 66 rated).
Often bought together optional accessories:
• DC 20 AMP System Master Switch DM PN 5890-DM30-20Amp SW- allows the
system to be safely enabled or disabled
• Fuse Holder DM 5891-DM-Fuse Holder
• Glass fuse 5892-DM-Glass Fuse-FB-10 (10 Amp rating) for 2 valves.
More information on pre-configured S2VT Valve kits, compatible products and
optional accessories is available at:
DM103
S3VT Valve Configuration Guide.pdf
KIT 6004-DM40-S3VT-S3VT-2DSP TECHNICAL DATA
S3VT VALVE PN 6009-DM10-S3VT
• 12 V DC, 3’’ Full flow valve
• On board Electronics Controller with feedback gate position control.
• High accuracy Semiconductor position sensors
• IP 66 Compliant – water proof, sealed electronics
• Reverse Polarity protected;
• Power-On safe ‘homing’ to closed position
• Operating time: 0.5 sec Typical at 12 V; 0.75 sec max
• Sensors provide Red (Open), Green (Closed) LED status to operating switch
• 2 ports for 2 switches (2nd switch option)
• Port Interface: Waterproof IP66 connector when mated and secured to
male
• Connector Type: Custom molded, 10 mm OD x 37 mm L, 4 pin female, gold
plated contacts.
• Screw-on protective cap (included on unused port if applicable)
• Compatible with 2 types of switches - for exposed or protected locations
• Green Power-On LED on the on board controller
• Back up Active motor safety: Internal timer 0.8-0.85 seconds
• Voltage range: 10.8 volts – 14.4 Volts. 12 V Nominal
• 12V power connector pigtail with seal included
• Stand by current under 50 ma with 2 switch LEDS active
• Slim profile, under ½”, on-board controller – fits
tight spaces
• Internal gearing: 303 Stainless steel, Swiss made
• Durable ABS, injection molded Valve Body and Parts
• Manual Override from both sides of valve with 1/8” allen key includeds
• Easily attached to 3" ABS male or female bolt-on flange fittings.
Mounting HW included
• Adaptable to most pipe sizes with proper fittings
• Special Seals Included
• Lubricant Dow Corning 111 included
DOUBLE SWITCH PANEL: DM PN 5847- RV Dbl Sw Pnl
PANEL
• Type: Flush mount, with 2 switches and custom PCB assembly
• Size: 4 Inch (W) x 3 Inch (H)
• Thickness 0.1 inch (100 mil)
• Material: Aluminum
• Graphics: Digitally imaged, color legends and outlines
• Overlay: 10 mil clear polycarbonate, UV and wear resistant
• Mounting holes: 0.13 inch dia. x 4, located 0.30 inch x 0.30 inch from
corners
• Max mounting panel thickness: 0.269 inch [6.83 mm]
• Rear clearance: 0.80 inch [20.26 mm] measured from front of mounting
panel (panel seating surface)
SWITCH
• Type: Hinged, Tactile, Snap Action
• Color: 1 Black, 1 Gray
• Size: 0.7 Inch (H) x 0.5 Inch (W), [18 mm (H) x 12 mm (W)]
• Interface: 2 x 6/4 RJ 11 sockets (1 per switch), gold plated contacts,
mounted on rear PCB assembly.
• Actuating force: Apr. 4.5 Oz, [130 gms.]
• Actuating stroke: 0.016 Inch (16 mil), [0.4 mm]
• Illumination: Internal Bright RED and GREEN LEDs, ballasted for 12 V
• Operating life: > 100,000 cycles
IP66-2 CABLE DM PN 5955-IP66-2 20’ Rnd. Cable Ass
• Type: AWM Style 2464 Cable
• Core: 4
• Wire: 4 x insulated cores, stranded copper, 7/30 per core, 26 AWG, Black
Outer Sheath
• Cable OD: 3.5 mm [0.140 inch]
• Length: 20 Ft std.; (Custom lengths available)
• Temp Rating: 60 Deg C
• Voltage rating: 150V
• Controller interface: Waterproof IP66 connector when mated and secured
to female.
• Connector Type: Custom molded, 12.9 mm OD x 36.5 mm L., 4 pin male,
gold plated contacts
• Switch interface: 6/4 RJ11 Plug, Gold plated contacts, for stranded
copper round wire.