• Click Image to Enlarge

Drain Master Pro-Series Smart Valve Kit provides everything to install 1 valve on a holding tank and an operator switch with a 20 Ft cable; 'add-a 2nd-switch' is optional
S3VT products are upgraded versions of the S2VT family and feature smaller, sleeker molded connectors with easy-route interconnect cables.
(S2VT products will continue to be available for additions and replacements to previously purchased / installed systems)
DM103 provides an S2VT to S3VT Cross Reference

6000-DM20-S3VT Kit includes:

1 Pro-Series S3VT valve
with dual port module, waterproof IP66 rated
1 Single switch, sealed IP66, Carlingtech
1 Interface Cable, IP 66, 20 Ft
Seals, Lube and Hardware

Have three or four tanks on your RV?
Give us a call. 877-787-8833

S3VT Valve comes with a 5 Year Limited Warranty!

**Due to high demand and COVID19 related delays, Pro-Series valves will ship 10-13 working days from order placement**


SKU: 6000
Price: $266.57
Quantity:

Share This:

Facebook Twitter

Pro-Series S3VT kits are upgraded versions of the S2VT family.
S3VT valves have smaller molded style connectors and easy - routing interconnect cables.
Drain Master Smart Sensing Valve Technology features a custom designed, slim profile, waterproof IP66 on-board electronic controller which handles 12VDC directly to the valve motor eliminating power loss regardless of the distance from the operator switch. The electronic controller opens or closes the valve in under a second. The movement is independent of the switch pressing time. Using high accuracy solid state sensors and feedback the controller stops the motor at the target position, vastly improving overall reliability and precision. The system is reverse polarity protected and features a power-on LED. At power up, the Green LED on the Controller lights up and the valve will home to 'safe' closed position. A 12 VDC 2 Pin Power connector with protection seals is standard.

The included operator switch features two LED lights - GREEN when the valve is closed, RED when the valve is Open. The switch is sealed, rated IP66 and can be mounted in any location, on any kind of RV.
Operator switches come in two illumination versions: PN 5787- DM30 - SVT- EXT for Exterior use has Super bright Red and Super bright Green LEDs; PN 5787- DM30 - SVT- INT for Interior use has bright Red LED and Soft Green LED. Please specify the version in the comments field at check out.

The included 20 Ft interface cable connects the switch to a controller port. The controller, connectors and interface cables are waterproof (IP 66 rated). The controller has two ports ensuring upgrade ability - adding a 2nd operator switch, for example, inside the RV for the ultimate in convenience, is a breeze.
The S3VT interconnect cable has reduced diameter and greater flexibility.

'Add-a-2nd Switch' can be done at any time with the following items, sold separately

Single switch, sealed IP66, Carlingtech: DM PN PN 5787- DM30 - SVT
• IP 66-2 cable, 20 Ft: DM PN 5955-IP66-2 20' Rnd. Cable Ass.
Custom cable lengths are available.

Often bought together optional accessories:

• DC 20 AMP System Master Switch DM PN 5890-DM30-20Amp SW- allows the system to be safely enabled or disabled
• Fuse Holder DM 5891-DM-Fuse Holder
• Glass fuse 5892-DM-Glass Fuse-FB-5 (5 Amp rating)

More information on pre-configured S3VT Valve kits, compatible products and optional accessories is available at:
DM103 S3VT Valve Configuration Guide.pdf

PRO-SERIES VALVE PN 6009-DM10-S3VT TECHNICAL SPECS.

• 12 V DC, 3’’ Full flow valve
• On board Electronics Controller with feedback gate position control.
• High accuracy Semiconductor position sensors
• IP 66 Compliant – water proof, sealed electronics
• Reverse Polarity protected;
• Power-On safe ‘homing’ to closed position
• Operating time: 0.5 sec Typical at 12 V; 0.75 sec max
• Sensors provide Red (Open), Green (Closed) LED status to operating switch
• 2 ports for 2 switches (2nd switch option)
• Port Interface: Waterproof IP66 connector when mated and secured to male
• Connector Type: Custom molded, 10 mm OD x 37 mm L, 4 pin female, gold plated contacts.
• Screw-on protective cap (included on unused port if applicable)
• Compatible with 2 types of switches - for exposed or protected locations
• Green Power-On LED on the on board controller
• Back up Active motor safety: Internal timer 0.8-0.85 seconds
• Voltage range: 10.8 volts – 14.4 Volts. 12 V Nominal
• Stand by current under 50 ma with 2 switch LEDS active
• Slim profile, under ½”, on-board controller – fits tight spaces
• Internal gearing: 303 Stainless steel, Swiss made
• Durable ABS, injection molded Valve Body and Parts
• Manual Override from both sides of valve with 1/8” allen key includeds
• Easily attached to 3" ABS male or female bolt-on flange fittings. Mounting HW included
• Adaptable to most pipe sizes with proper fittings
• Special Seals Included
• Lubricant Dow Corning 111 included

SINGLE SWITCH PN 5787- DM30 - SVT TECHNICAL DATA

• Type: Flush mount, momentary contact rocker with custom PCB assembly
• Sealing: Switch sealed with dual seals around LEDs and rocker stem
• IP rating: IP66 & IP68 from front panel
• Hole cutout: Industry standard 0.830” x 1.450” hole.
• Panel thickness (direct panel mount): Min: 0.030 inch [0.76mm] Max: 0.187 inch [4.75 mm]
• Panel thickness (optional dress plate mount): Max: 1 inch [25.4 mm]
• Rear clearance requirement: 1.92 Inch measured from front of panel (switch seating surface)
• Interface: 6/4 RJ 11 socket, gold plated contacts, mounted on rear PCB assembly
• Actuator: Aesthetic symmetrically curved, black nylon
• Actuating force: 460 grams +/- 30, [4.5 N +/- 0.3]
• Actuating distance to rocker center: 20 mm
• Illumination options: (User to specify in comments field at check out)
— Exterior Application: PN 5787- DM30 - SVT- EXT w super bright Red and super bright Green LEDs
— Interior Application: PN 5787- DM30 - SVT- INT w bright Red LED and soft Green LED.
• Lens - Dual prismatic, clear polycarbonate set in rocker
• Operating life: 50,000 cycles min
• Industry certification: Switch meets MIL Std 202F, MIL Std 810C, UL 1500, ISO 8846, IEC 60529 and BS 5490

IP66-2 CABLE DM PN 5955-IP66-2 20’ Rnd. Cable Ass TECHNICAL DATA

• Type: AWM Style 2464 Cable
• Core: 4
• Wire: 4 x insulated cores, stranded copper, 7/30 per core, 26 AWG, Black Outer Sheath
• Cable OD: 3.5 mm [0.140 inch]
• Length: 20 Ft std.; (Custom lengths available)
• Temp Rating: 60 Deg C
• Voltage rating: 150V
• Controller interface: Waterproof IP66 connector when mated and secured to female.
• Connector Type: Custom molded, 12.9 mm OD x 36.5 mm L., 4 pin male, gold plated contacts
• Switch interface: 6/4 RJ11 Plug, Gold plated contacts, for stranded copper round wire.

Pro-Series S3VT Valve Kit Installation

Kit installation involves 3 steps - a) Installing Valve b) Operator switch and wiring c) 12 VDC wiring
Use the links below to S3VT Companion Documents.
Follow the instructions to complete the installation process.

DM101 S3VT Valve Installation
DM102 S3VT Operating Switch and Cable Installation
DM104 S3VT 12V DC Wiring Diagram

PDF Files open in a new window - view in browser or save for off-line viewing or printing.