Double Switch Panel, with 2 snap action, tactile switches to operate 'Gray'
and 'Black' tank S2VT valves. Each switch has 2 status LEDs.
Panel may be mounted inside the RV or outside in protected locations or compartments.
Double Switch panel assembly alone, connecting cables not included.
Integrated space saving, 2 switch panel comes with snap action, tactile switches
to operate S2VT valves on 'Black' and 'Gray' tanks. Switches are a hinged
style, light tactile touch, momentary contact, mounted on custom PCB assembly with RJ 11 interface
sockets. Switch colors match their function and are set in color outlines on
the panel. Each switch has 2 high brightness status LEDs- GREEN lights up when
valve is 'Closed', RED when valve is 'Open'. The panel features digitally imaged
graphics protected by a 10 mil clear, UV and wear resistant, overlay. It is tolerant
to water droplets and operating with wet fingers, for instance, is OK.
To operate valves from 2 locations, a 2nd Double switch panel or 1 or 2 Single
Switches DM PN 5787 – DM30 – SV may be added. For example, 1 Double switch panel may be located on inside of RV or other convenient
location and a 2nd one located in a outer compartment or protected area. For
switches located where severe water exposure is unavoidable, use IP 66 Single
switches DM PN 5787 – DM30 – SV. All Switches are functionally compatible
and regardless of the switch type used, status is indicated in both.
The Double switch assembly is mounted to RV panel via 4 mounting holes using
either self tapping or machine screws/nuts.
It is also fully compatible with older DM SVT valves as a drop in replacement.
Item compatible with Double Switch Panel :
• IP 66 cable DM PN 5846-IP66 20' Rnd. Cable Ass. Each switch requires
one IP 66 interface cable.
Item Double Switch Panel is often used in combination with:
• S2VT Single Switch DM PN 5787 – DM30 – SV
• Type: Flush mount, with 2 switches and custom PCB assembly
• Size: 4 Inch (W) x 3 Inch (H)
• Thickness 0.1 inch (100 mil)
• Material: Aluminum
• Graphics: Digitally imaged, color legends and outlines
• Overlay: 0.010 inch (10 mil) clear polycarbonate, UV and wear resistant
• Mounting holes: 0.13 inch dia. x 4, located 0.30 inch x 0.30 inch from
• Max mounting panel thickness: 0.269 inch [6.83 mm]
• Rear clearance: 0.80 inch [20.26 mm] measured from front of mounting
panel (panel seating surface)
• Type: Hinged, Tactile, Snap Action
• Color: 1 Black, 1 Gray
• Size: 0.7 Inch (H) x 0.5 Inch (W), [18 mm (H) x 12 mm (W)]
• Interface: 2 x 6/4 RJ 11 sockets (1 per switch), gold plated contacts,
mounted on rear PCB assembly.
• Actuating force: Apr. 4.5 Oz, [130 gms.]
• Actuating stroke: 0.016 Inch (16 mil), [0.4 mm]
• Illumination: Internal Bright RED and GREEN LEDs, ballasted for 12 V
• Operating life: > 100,000 cycles
Double Switch Panel Installation Instructions are covered in document link below: