(877) 787-8833
Waste Master RV Sewer Hose Storage System 5913
Waste Master RV Sewer Hose Storage System 5913
Waste Master Vent Kit Installed
Waste Master Vent Kit View
Waste Master Vent Kit Diagram

Waste Master Vent Assembly

$119.28

Waste Master Vent Assembly for use with “always connected” hose system and storage enclosure PN 5856. Permits hose to extend or retract with valves closed.

Includes-

  • Female Cam Loc Fitting
  • Air Release Valve Assembly (ARV)
  • All required fittings
  • LDPE pipe.

Waste Master Sewer Hose not included.

Description

DM Vent Assembly for use with permanently connected hose system and storage enclosure PN 5856. Permits hose to extend or retract with valves closed.

Includes Female Cam Loc, Air Release Valve Assembly (ARV), all required fittings and LDPE pipe.

Waste Master Sewer Hose not included.

Additional information

Weight 2 lbs
Dimensions 13 × 11.5 × 6 in

Features

The ultimate in convenience, the DM Vent Assembly is used with a “always connected” hose system and storage enclosure PN 5856. It allows the hose to readily extend or retract with dump valves closed. The kit comes with a Female Cam Loc pre-threaded with 3/4″ NPT hole to fit Air Release Valve (ARV); other required fittings, piping and elbow are all included. The ARV permits air flow in and out of the hose but seals up instantly in presence of liquid flow allowing completely normal drain operation. Waste Master Sewer Hose is not included.

Technical Data

VENT ASSEMBLY KIT PN 5903 TECHNICAL DATA

CAM LOC FITTING

• Type: Industrial Grade, Leak Proof Female fitting using Cam Loc Technology
• ID: 3.51″ (fits over std.3″ ID plumbing)
• Barrel OD: 4.125″
• Max OD: 4.35″(Collar end)
• Length: 4.32″ (without Cap)
• Length: 4.9″ Max (with cap engaged measured over ring retainer boss)
• Max width across levers closed: 5.55″
• Max width across levers open: 9.7″
• Insertion depth over 3″ ID Plumbing: 0.5″ Min, 1.7″ max
• Mounting method: ABS glue
• Cap: Male Cam Loc with Chain and Ring retainer included
• Sealing: Rubber gasket pre-installed in Female Cam Loc
• Threading: 3/4″ NPT Pre-threaded to fit Air Release Valve
• Material: ABS
• Color: Black
• Click to view: Cam Loc Dimensions in detail Doc. WM 78

AIR RELEASE VALVE
• Type: Poly Flotation Ball and internal Ring seal
• Height: 5 ” Max, with Cap, including 3/4″ NPT male threaded shank
• Height: 4.25 “with cap, excluding threaded shank
• Body Barrel OD: 1.55″
• Max Body OD: 1.85″
• Max Cap OD: 1.7″
• Cap Threading: 3/4” Garden Hose

FITTINGS
• 3/4″ FNPT to FNPT Qty1
• 3/4″ MNPT to Quick Connect Qty 2
• 3/4″ MNPT to FNPT 90 Deg Elbow Qty 1

LDPE SEMI-RIGID PIPE
• ID: 0.725″
• OD: 0.825″
• Wall Thickness: 50 mil (0.05″)
• Length supplied: 4 Ft +/- 3 ” (to be cut as needed based on application)

Installation

The few additional steps required for installing the Vent are simple as the female Cam Loc fittings comes pre-prepared to accept the vent.

WM91 Vent Assembly Kit Install Instructions

You may also like…