20 Ft. Interface Cable for S3VT Pro-Series Valves


20 Ft, IP66-2, interface cable for use with S3VT Pro-Series Drain Master Valves.

Connects Single Switch or Double Switch Panel to valve controller port.

1 Year Warranty


This interface cable connects the Operator switch to an S3VT Pro-Series valve. It is an upgraded version with a molded, smaller, sleeker male connector and reduced cable diameter for easy routing. The cable carries all the signals between the switch and the valve. It is waterproof (IP 66 rated) when mated with matching female on the controller port. The connector combination is good for any kind of RV even with valves mounted in an exposed location. The switch interface is a high quality, 6/4 RJ 11 plug with gold plated contacts. Each Port – Switch connection requires 1 cable. The std. cable length is 20 Ft . Custom lengths are available- please contact us.

Note: Interface cable for S3VT (PN 5955-IP66-2-20′ Rnd. Cable) is not interchangeable with S2VT interface cable (PN 5846-IP66 20’ Rnd. Cable)

Items compatible with IP 66-2 cable:

Single switch, sealed IP66, Carlingtech: DM PN PN 5787- DM30 – SVT
Double Switch Panel PN: 5847- RV Dbl SW PNL

Technical Data

IP66-2 CABLE DM PN 5955-IP66-20’ Rnd. Cable Ass TECH. DATA

• Type: AWM Style 2464 Cable
• Core: 4
• Wire: 4 x insulated cores, stranded copper, 7/30 per core, 26 AWG, Black Outer Sheath
• Cable OD: 3.5 mm [0.140 inch] • Length: 20 Ft std.; (Custom lengths available)
• Temp Rating: 60 Deg C
• Voltage rating: 150V
• Controller interface: Waterproof IP66 connector when mated and secured
to female.
• Connector Type: Custom molded, 12.9 mm OD x 36.5 mm L., 4 pin male, gold plated contacts
• Switch interface: 6/4 RJ11 Plug, Gold plated contacts, for stranded copper round wire.


S3VT Interface cable (IP66-2) installation instructions are covered in document
link below:

DM102 S3VT Operating Switch and Cable Installation

PDF Files open in a new window – view in browser or save for off-line viewing or printing

You may also like…