Automated Dumping with Drain Master Pro-Series Waste Valves
Dealing with RV waste has been a time consuming, labor intensive and often unhygienic process. With the new Pro Series line of Drain Master electronic valves, manual dumping is a thing of the past. Automated dumping allows the operator to deal with RV waste safely and efficiently.
Although still effective, in our previous models the Premium Drain Master Valves needed 12VDC power at the switch. With the new Pro-Series Valve switch, there is no need for a 12VDC source. A milliamp signal from the valve’s on-board controller is sent to the operator switch to activate the valves. This saves time, money, and materials with the entire installation process.
The Pro-Series Valve Switch features two LED lights. One light is green for when the waste valve is closed, and one is red for when the waste valve is open. The Carlingtech switch has a watertight seal rated at IP66, and can be mounted on any location of any RV.
The Pro-Series Valve Cable features a 20-foot permanently attached interface, which connects the valve switch to the two controller ports via an RJ11 connector.
This allows the dump valve to be operated from two locations. And as automated dumping becomes more advanced, the second port can be interfaced with other devices.
Gain insight into the experience of one of our customers as they installed our electric valves and performed “heart surgery” on their plumbing and holding tanks by clicking here.
For more information on Pro Series Switches and Cables or our other RV Waste Management products, please contact us toll free at 877-787-8833 or at firstname.lastname@example.org