Pro-Series S3VT kits are upgraded versions of the S2VT family.
S3VT valves have smaller molded style connectors and easy - routing interconnect
cables.
Drain Master Smart Sensing Valve Technology features a custom designed, slim
profile, waterproof IP66 on-board electronic controller which handles 12VDC
directly to the valve motor eliminating power loss regardless of the distance
from the operator switch. The electronic controller opens or closes the valve
in under a second. The movement is independent of the switch pressing time.
Using high accuracy solid state sensors and feedback the controller stops the
motor at the target position, vastly improving overall reliability and precision.
The system is reverse polarity protected and features a power-on LED. At power
up, the Green LED on the Controller lights up and the valve will home to 'safe'
closed position. The 12V power connector comes with protection seals and matching
pigtail for easy connectivity.
Each Double Switch Panel has 2 snap action, tactile switches in Black and Gray
set in
matching graphic outlines. The panel features digitally imaged graphics protected
by a clear,
UV and wear resistant, overlay. One Double Switch Panel is mounted at a convenient
location inside
the RV while the 2nd is mounted in the outer panel in a location protected from
water.
The Single switch (Carlingtech) are sealed water proof (IP 66 rated) rocker
style typically mounted in the
outer panel for the 'Galley' tank.With this arrangement the Black and Gray Tank
valves can be operated from
either location for the ultimate in convenience, while the Galley Tank valve
is operated from the outside panel.
All switches have 2 LED lights - GREEN lights up when valve is 'Closed', RED
when valve is 'Open'.
Single Operator switches come in two illumination versions: PN 5787- DM30 -
SVT- EXT has Super bright Red and Super bright Green LEDs;
PN 5787- DM30 - SVT- INT has bright Red LED and Soft Green LED. Please specify
the versions in the comments field at check out.
The included 20 Ft interface cables connect the switches to the dual port. The
controller, connectors and interface cables are waterproof (IP 66 rated).
S3VT interconnect cables have reduced diameter and greater flexibility for routing
ease. Custom cable lengths are available.
Often bought together optional accessories:
• DC 20 AMP System Master Switch DM PN 5890-DM30-20Amp SW- allows the
system to be safely enabled or disabled
• Fuse Holder DM 5891-DM-Fuse Holder
• Glass fuse 5892-DM-Glass Fuse-FB-5 (5 Amp rating)
• Glass fuse 5892-DM-Glass Fuse-FB-15 (15 Amp rating)
More information on pre-configured S3VT Valve kits, compatible products and optional accessories
is available at:
DM103
S3VT Valve Configuration Guide.pdf
KIT PN 6008-DM40-S3VT-2DSP-1CT TECHNICAL DATA
S3VT VALVE PN 6009-DM10-S3VT
• 12 V DC, 3’’ Full flow valve
• On board Electronics Controller with feedback gate position control.
• High accuracy Semiconductor position sensors
• IP 66 Compliant – water proof, sealed electronics
• Reverse Polarity protected;
• Power-On safe ‘homing’ to closed position
• Operating time: 0.5 sec Typical at 12 V; 0.75 sec max
• Sensors provide Red (Open), Green (Closed) LED status to operating switch
• 2 ports for 2 switches (2nd switch option)
• Port Interface: Waterproof IP66 connector when mated and secured to
male
• Connector Type: Custom molded, 10 mm OD x 37 mm L, 4 pin female, gold
plated contacts.
• Screw-on protective cap (included on unused port if applicable)
• Compatible with 2 types of switches - for exposed or protected locations
• Green Power-On LED on the on board controller
• Back up Active motor safety: Internal timer 0.8-0.85 seconds
• Voltage range: 10.8 volts – 14.4 Volts. 12 V Nominal
• 12V power connector pigtail with seal included
• Stand by current under 50 ma with 2 switch LEDS active
• Slim profile, under ½”, on-board controller – fits
tight spaces
• Internal gearing: 303 Stainless steel, Swiss made
• Durable ABS, injection molded Valve Body and Parts
• Manual Override from both sides of valve with 1/8” allen key includeds
• Easily attached to 3" ABS male or female bolt-on flange fittings.
Mounting HW included
• Adaptable to most pipe sizes with proper fittings
• Special Seals Included
• Lubricant Dow Corning 111 included
DOUBLE SWITCH PANEL: DM PN 5847- RV Dbl Sw Pnl TECHNICAL DATA
PANEL
• Type: Flush mount, with 2 switches and custom PCB assembly
• Size: 4 Inch (W) x 3 Inch (H)
• Thickness 0.1 inch (100 mil)
• Material: Aluminum
• Graphics: Digitally imaged, color legends and outlines
• Overlay: 10 mil clear polycarbonate, UV and wear resistant
• Mounting holes: 0.13 inch dia. x 4, located 0.30 inch x 0.30 inch from
corners
• Max mounting panel thickness: 0.269 inch [6.83 mm]
• Rear clearance: 0.80 inch [20.26 mm] measured from front of mounting
panel (panel seating surface)
SWITCH (on double panel)
• Type: Hinged, Tactile, Snap Action
• Color: 1 Black, 1 Gray
• Size: 0.7 Inch (H) x 0.5 Inch (W), [18 mm (H) x 12 mm (W)]
• Interface: 2 x 6/4 RJ 11 sockets (1 per switch), gold plated contacts,
mounted on rear PCB assembly.
• Actuating force: Apr. 4.5 Oz, [130 gms.]
• Actuating stroke: 0.016 Inch (16 mil), [0.4 mm]
• Illumination: Internal RED and GREEN LED, ballasted for 12 V
• Operating life: > 100,000 cycles
SINGLE SWITCH PN 5787- DM30 - SVT
• Type: Flush mount, momentary contact rocker with custom PCB assembly
• Sealing: Switch sealed with dual seals around LEDs and rocker stem
• IP rating: IP66 & IP68 from front panel
• Hole cutout: Industry standard 0.830” x 1.450” hole.
• Panel thickness (direct panel mount): Min: 0.030 inch [0.76mm] Max:
0.187 inch [4.75 mm]
• Panel thickness (optional dress plate mount): Max: 1 inch [25.4 mm]
• Rear clearance requirement: 1.92 Inch measured from front of panel (switch
seating surface)
• Interface: 6/4 RJ 11 socket, gold plated contacts, mounted on rear PCB
assembly
• Actuator: Aesthetic symmetrically curved, black nylon
• Actuating force: 460 grams +/- 30, [4.5 N +/- 0.3]
• Actuating distance to rocker center: 20 mm
• Illumination options: (User to specify in comments field at check out)
— Exterior Application: PN 5787- DM30 - SVT- EXT w super bright Red and
super bright Green LEDs
— Interior Application: PN 5787- DM30 - SVT- INT w bright Red LED and
soft Green LED.
• Lens - Dual prismatic, clear polycarbonate set in rocker
• Operating life: 50,000 cycles min
• Industry certification: Switch meets MIL Std 202F, MIL Std 810C, UL
1500, ISO 8846, IEC 60529 and BS 5490
IP66-2 CABLE DM PN 5955-IP66-2 20’ Rnd. Cable Ass
• Type: AWM Style 2464 Cable
• Core: 4
• Wire: 4 x insulated cores, stranded copper, 7/30 per core, 26 AWG, Black
Outer Sheath
• Cable OD: 3.5 mm [0.140 inch]
• Length: 20 Ft std.; (Custom lengths available)
• Temp Rating: 60 Deg C
• Voltage rating: 150V
• Controller interface: Waterproof IP66 connector when mated and secured
to female.
• Connector Type: Custom molded, 12.9 mm OD x 36.5 mm L., 4 pin male,
gold plated contacts
• Switch interface: 6/4 RJ11 Plug, Gold plated contacts, for stranded
copper round wire.