Pro-Series S3VT Valves are upgraded versions of the S2VT Valves.
S3VT valves have smaller molded style connectors and easy - routing interconnect
cables.
Drain Master Smart Sensing Valve Technology features a custom designed, slim
profile, waterproof IP66 on-board electronic controller which handles 12VDC
directly to the valve motor eliminating power loss regardless of the distance
from the operator switch. The electronic controller opens or closes the valve
in under a second. The movement is independent of the switch pressing time.
Using high accuracy solid state sensors and feedback the controller stops the
motor at the target position, vastly improving overall reliability and precision.
The system is reverse polarity protected and features a power-on LED. At power
up, the Green LED on the Controller lights up and the valve will home to 'safe'
closed position. The 12V power connector comes with protection seals and matching
pigtail for easy connectivity
The controller, connectors and interface cables are waterproof (IP 66 rated).
T
All operator switches (purchased separately) feature two LED lights - GREEN
when the valve is closed, RED when the valve is Open. The controller has two
ports ensuring upgradeability. Adding a 2nd operator switch, for example, inside
the RV for the ultimate in convenience, is a breeze. The S3VT interconnect cable
has reduced diameter and greater flexibility for easier routing.
Select from the following compatible items required to complete the system
to your needs:
• Single switch, sealed IP66, Carlingtech: Come
in two illumination versions: PN 5787- DM30 - SVT- EXT for Exterior use has
Super bright Red and Super bright Green LEDs; PN 5787- DM30 - SVT- INT for Interior
use has bright Red LED and Soft Green LED. Please specify the version in the
comments field at check out.
• Double switch panel with digitally imaged graphics - 'Black and 'Gray':
DM PN 5847-RV Dbl SW PNL - features 2 soft touch switches to operate 2 valves;
install in protected location
• Single switches and Double Switch panel may be used in combination.
• IP66-2 cable DM PN 5955-IP66-20' Rnd. Cable Ass. Each switch requires
one IP66-2 interface cable.
Often bought together accessories:
• DC 20 AMP System Master Switch DM PN 5890-DM30-20Amp SW- allows the
system to be safely enabled or disabled
• Fuse Holder DM 5891-DM-Fuse Holder
• Glass fuse 5892-DM-Glass Fuse-FB-5, or -10 or -15 (5 Amp, 10 Amp, 15
Amp - based on number of valves)
More information on pre-configured S3VT Valve kits, compatible products and
optional accessories is available at:
DM103
S3VT Valve Configuration Guide.pdf
S3VT VALVE PN 6009-DM10-S3VT
• 12 V DC, 3’’ Full flow valve
• On board Electronics Controller with feedback gate position control.
• High accuracy Semiconductor position sensors
• IP 66 Compliant – water proof, sealed electronics
• Reverse Polarity protected;
• Power-On safe ‘homing’ to closed position
• Operating time: 0.5 sec Typical at 12 V; 0.75 sec max
• Sensors provide Red (Open), Green (Closed) LED status to operating switch
• 2 ports for 2 switches (2nd switch option)
• Port Interface: Waterproof IP66 connector when mated and secured to
male
• Connector Type: Custom molded, 10 mm OD x 37 mm L, 4 pin female, gold
plated contacts.
• Screw-on protective cap (included on unused port if applicable)
• Compatible with 2 types of switches - for exposed or protected locations
• Green Power-On LED on the on board controller
• Back up Active motor safety: Internal timer 0.8-0.85 seconds
• Voltage range: 10.8 volts – 14.4 Volts. 12 V Nominal
• 12V power connector pigtail with seal included
• Stand by current under 50 ma with 2 switch LEDS active
• Slim profile, under ½”, on-board controller – fits
tight spaces
• Internal gearing: 303 Stainless steel, Swiss made
• Durable ABS, injection molded Valve Body and Parts
• Manual Override from both sides of valve with 1/8” allen key includeds
• Easily attached to 3" ABS male or female bolt-on flange fittings.
Mounting HW included
• Adaptable to most pipe sizes with proper fittings
• Special Seals Included
• Lubricant Dow Corning 111 included
• Optional System master switch to enable/disable system: 12VDC, 20 amp
recommended in +12V DC supply line (user supplied item; may also be purchased
as an optional accessory from Drain Master)
• Optional Passive safety: Fast blow fuse recommended in +12 VDC supply
line (user supplied item; may also be purchased as an optional accessory from
Drain Master)