Drain Master, Smart Sensing Valve Technology - S2VT- features a custom designed,
slim profile, waterproof IP66 on-board electronic controller which handles 12VDC directly to
the valve motor eliminating power loss regardless of the distance from the operator
switch. The electronic controller opens or closes the valve in under a second.
The movement is independent of the switch pressing time. Using high accuracy
solid state sensors and feedback the controller stops the motor at the
target position, vastly improving overall reliability and precision. The system
is reverse polarity protected and features a power-on LED. At power up, the
Green LED on the Controller lights up and the valve will home to 'safe' closed
position. The 12 VDC connector is a standard Molex 2 Pin style. A waterproof
12 VDC 2 pin connector is an available option.
Each Double Switch Panel has 2 snap action, tactile switches in Black and Gray
set in matching graphic outlines. The panel features digitally imaged graphics
protected by a clear, UV and wear resistant, overlay. One Double panel is mounted
at a convenient location inside the RV while the 2nd is mounted in the outer
panel in a location protected from water.
The Single switch (Carlingtech) is a sealed water proof (IP 66 rated) rocker
style and mounted in the outer control panel typically for the 'Galley' tank
They are ideally suited for locations where water exposure is likely and unavoidable.
With this arrangement the Black and Gray Tank valves can be operated from either location for the
ultimate in convenience, while the Galley Tank valve is operated from the outside panel.
All switches, those on the Double panels or Single switches, have 2 LED lights
- GREEN lights up when valve is 'Closed', RED when valve is 'Open'.
The kit includes 20 Ft interface cables; custom cable lengths are available.
The cables connect the switches to controller ports on the respective valve.
The small diameter interface cable is very easily routed. The controller, connectors
and interface cables are waterproof (IP 66 rated).
Often bought together optional accessories:
• DC 20 AMP System Master Switch DM PN 5890-DM30-20Amp SW- allows the
system to be safely enabled or disabled
• Fuse Holder DM 5891-DM-Fuse Holder
• Glass fuse 5892-DM-Glass Fuse-FB-10 (10 Amp rating) for 2 valves.
More information on pre-configured S2VT Valve kits, compatible products and optional accessories
is available at:
DM90 S2VT Valve Configuration Guide.pdf
KIT PN 5934-DM40-S2VT-2CT-1DSP TECHNICAL DATA
S2VT VALVE PN 5878-DM10-S2VT
• 12 V DC, 3’’ Full flow valve
• On board Electronics Controller with feedback gate position control.
• High accuracy Semiconductor position sensors
• IP 66 Compliant – water proof, sealed electronics & connectors
• Reverse Polarity protected
• Power-On safe ‘homing’ to closed position
• Operating time: 0.5 sec Typical at 12 V; 0.6 sec max
• Sensors provide Red (Open), Green (Closed) LED's status to operating
switch
• 2 ports for 2 switch operation.
• Port Interface: Waterproof IP66 connector, 13 mm Dia., 4 pin female,
gold plated contacts, screw-on protective cap
• Compatible with 2 types of switches - for exposed or protected locations
• Green Power-On LED on the on board controller
• Back up Active motor safety: Internal timer 0.7- 0.8 seconds
• Voltage range: 10.8 volts – 14.4 Volts. 12 V Nominal
• Stand by current under 50 ma with 2 switch LEDS active
• Slim profile, under ½”, on-board controller – fits
tight spaces
• Internal gearing: 303 Stainless steel, Swiss made
• Durable ABS, injection molded Valve Body and Parts
• Manual Override from both sides of valve with 1/8” allen key included
• Easily attached to 3" ABS male or female bolt-on flange fittings.
Mounting HW included
• Adaptable to most pipe sizes with proper fittings
• Special Seals Included
• Lubricant Dow Corning 111 included
DOUBLE SWITCH PANEL: DM PN 5847- RV Dbl Sw Pnl TECHNICAL DATA
PANEL
• Type: Flush mount, with 2 switches and custom PCB assembly
• Size: 4 Inch (W) x 3 Inch (H)
• Thickness 0.1 inch (100 mil)
• Material: Aluminum
• Graphics: Digitally imaged, color legends and outlines
• Overlay: 10 mil clear polycarbonate, UV and wear resistant
• Mounting holes: 0.13 inch dia. x 4, located 0.30 inch x 0.30 inch from
corners
• Max mounting panel thickness: 0.269 inch [6.83 mm]
• Rear clearance: 0.80 inch [20.26 mm] measured from front of mounting
panel (panel seating surface)
SWITCH (on double panel)
• Type: Hinged, Tactile, Snap Action
• Color: 1 Black, 1 Gray
• Size: 0.7 Inch (H) x 0.5 Inch (W), [18 mm (H) x 12 mm (W)]
• Interface: 2 x 6/4 RJ 11 sockets (1 per switch), gold plated contacts,
mounted on rear PCB assembly.
• Actuating force: Apr. 4.5 Oz, [130 gms.]
• Actuating stroke: 0.016 Inch (16 mil), [0.4 mm]
• Illumination: Internal RED and GREEN LED, ballasted for 12 V
• Operating life: > 100,000 cycles
SINGLE SWITCH PN 5787- DM30 - SVT TECHNICAL DATA
• Type: Flush mount, momentary contact rocker with custom PCB assembly
• Sealing: Switch sealed with dual seals around LEDs and rocker stem
• IP rating: IP66 & IP68 from front panel
• Hole cutout: Industry standard 0.830” x 1.450” hole.
• Panel thickness (direct panel mount): Min: 0.030 inch [0.76mm] Max:
0.187 inch [4.75 mm]
• Panel thickness (optional dress plate mount): Max: 1 inch [25.4 mm]
• Rear clearance requirement: 1.92 Inch measured from front of panel (switch
seating surface)
• Interface: Connects via 6/4 RJ 11 socket, gold plated contacts on rear
PCB assembly,
• Actuator: Aesthetic symmetrically curved, black nylon
• Actuating force: 460 grams +/- 30, [4.5 N +/- 0.3]
• Actuating distance to rocker center: 20 mm
• Illumination: Internal Super Bright RED and Super GREEN LED, ballasted
for 12 V
• Lens - Dual prismatic, clear polycarbonate set in rocker
• Operating life: 50,000 cycles min
• Industry certfication: Carlingtech Switch meets MIL Std 202F, MIL Std
810C, UL 1500, ISO 8846, IEC 60529 and BS 5490
IP66 CABLE DM PN 5846-IP66 20’ Rnd. Cable Ass TECHNICAL DATA
• Type: Telephone, FT4, Cat 3
• Core: 4
• Wire: Solid copper, 24 G individually insulated, white outer sheath
• Cable OD: 3.5 mm [0.140 inch]
• Length; 20 Ft std.; Custom lengths available
• Temp Rating: 60 Deg C
• Voltage rating: 150V
• Controller interface: 4 pin Male, Gold plated connector, 13mm Dia, Sealed
Waterproof IP66, with screw-on protective cap
• Switch interface: 6/4 RJ11 Plug, Gold plated, for solid core round wire.