For the best online experience using mobile devices, please turn your device sideways while viewing this site.


  • Click Image to Enlarge


  • Click Image to Enlarge

Kit comprises 2nd Gen. Waste Master Hose Enclosure PN 5856, Mounting Bracket Kit PN 5911 and Waste Master Hose with Nozzle Kit PN 5817 which includes a female Cam Loc fitting without the vent. As a rule Vent Kit installation is recommended, preferred and proper method. Select this kit only as an exception where the Vent Assembly Kit simply cannot be installed due to space or other restrictions. The Enclosure stores the complete Waste Master 20 Ft Hose, the Mounting Bracket Kit provides easy enclosure installation and wide adjustment range. Hose extend and retract requires care and partailly opening hose nozzle for air release. Meant for 5th wheels and travel trailers, this kit has everything needed for a permanently connected Hose and Storage system including Waste Master Hose and Nozzle assembly.

For cost effective shipping and ordering ease, several kits are listed on this site and in the 'Features' tab.

Now available by Phone Order - Toll Free 1 877 787 8833


SKU: 5915
Price: $337.99
Quantity:

Share This:

Facebook Twitter

This Kit combines 2nd Gen. Waste Master Enclosure PN 5856, Mounting Bracket Kit PN 5911 and the Waste Master 20 Ft Hose with Nozzle Kit PN 5817 which includes a female Cam Loc fitting without Vent hole threading. As a rule, we strongly recommend Vent Assembly kit be installed for air release as the preferred and proper method to extend and retract hose. Use kit 5915 as an exception when Vent Assembly simply cannot be installed due to space or other restrictions. The kit has everything, including the hose, needed to create a complete system with the hose permanently connected, eliminating the need to disconnect every time. The system simplifies waste management - the most challenging task for RVers.

The Mounting Bracket Kit includes the Bracket and matching 3/8 inch, SAE hardware. The Bracket is a steel part, preformed, drilled and powder coat finished in Black and mounts to the underside of the RV (5th Wheel or Travel Trailer) I-Beam or Chassis with self tapping screws. Using 4 point support the bracket firmly anchors the enclosure by its outer 'wings' using the included hardware.

The included Hose uses patented 'Stay-Put' Technology with 4:1 collapsibility so the 20 ft Hose stores easily in the enclosure with the nozzle. It comes with a female Cam Loc fitting that installs on the RV exit plumbing for hose connection.

This Kit combines 2nd Gen. Waste Master Enclosure PN 5856, Mounting Bracket Kit PN 5911 and the Waste Master 20 Ft Hose with Nozzle Kit PN 5817 which includes a female Cam Loc fitting without Vent hole threading. As a rule, we strongly recommend Vent Assembly kit be installed for air release as the preferred and proper method to extend and retract hose. Use kit 5915 as an exception when Vent Assembly simply cannot be installed due to space or other restrictions. The kit has everything, including the hose, needed to create a complete system with the hose permanently connected, eliminating the need to disconnect every time. The system simplifies waste management - the most challenging task for RVers.

The Mounting Bracket Kit includes the Bracket and matching 3/8 inch, SAE hardware. The Bracket is a steel part, preformed, drilled and powder coat finished in Black and mounts to the underside of the RV (5th Wheel or Travel Trailer) I-Beam or Chassis with self tapping screws. Using 4 point support the bracket firmly anchors the enclosure by its outer 'wings' using the included hardware.

The included Hose uses patented 'Stay-Put' Technology with 4:1 collapsibility so the 20 ft Hose stores easily in the enclosure with the nozzle. It comes with a female Cam Loc fitting that installs on the RV exit plumbing for hose connection.

Documents listed in the 'Install' Tab show the user how to determine the bracket and enclosure location based on the RV's sewer outlet location and other relevant features. A wide range of adjustment is feasible. A key factor is the 'Drop Height' defined as the distance from the bottom of the I-Beam to the top of the enclosure. The Mounting Bracket Kit allows Drop Height adjustment from 1 to 4 inches, covering majority of applications. If your RV configuration requires greater drop height or needs the sewer outlet relocated, please contact us for a possible solution. We have assisted many RVers successfully customize their system.

The 5915 Kit operation differs from other WM kits that have the vent assembly kits installed. Please refer to the 'Operation' Tab for details.

If you need help we will gladly provide any advice and hand holding needed and share with you examples of other installations. Man's mind when stretched to new dimensions never shrinks back to the old - once you enjoy the convenience of a permanently connected hose you will never go back to the old ways! RVers who have this system are simply overjoyed with it and are sharing their stories with others. So will you!

Waste Master Kits offer more cost effective shipping and ordering ease. Listed below are all the Waste Master kits we offer:

• Kit PN 5912: Enclosure PN 5856 and Mounting Bracket Kit PN 5911
• Kit PN 5913: Enclosure PN 5856, Mounting Bracket Kit PN 5911 and Vent assembly Kit PN 5903
• Kit PN 5914: Enclosure PN 5856, Mounting Bracket Kit PN 5911, Vent assembly Kit PN 5903 and Waste Master 20 Ft Hose with Nozzle PN 5816
• Kit PN 5915: Enclosure PN 5856, Mounting Bracket Kit PN 5911, Waste Master 20 Ft Hose with Nozzle and Female Cam Loc Kit PN 5817

KIT PN 5915 TECHNICAL DATA

ENCLOSURE PN 5856
• Dimensions - Main Enclosure 46" Long x 8.50" high x 14" wide (Excludes mounting 'Wings' either side at top)
• Mounting 'Wings': 46" Long x 1.5" wide extend each side at top
• Max. Width at Top: 17"
• Material: ABS
• Bottom and side wall thickness: 0.1"(100 mil)
• Top Wall Thickness: 0.15"(150 mil) at middle increasing to 0.2 (200 mil) at mounting wings
• Storage Capacity: Stores WM 20 Foot hose complete with nozzle, PN 5816
• Storage Options: Primary - as Permanently connected Hose configuration; Optionally - Hose storage only.
• Security: Door Lock included
• Hinge Protection: Restaints limit door swing to approx. 150 Deg, eliminate hinge stress; smoothens hose exit
• Hose Entry Hole Dia: 4" (Cutout required as part of install in permanently connected hose configuration)
• Hose Entry Direction: Either side wall; right or left side entry option
• Hose Entry Hole Location: 12"( +/- 1/2") from front, 2 7/8" below mounting 'wing'

MOUNTING BRACKET KIT PN 5911

BRACKET
• Type: Preformed, predrilled custom bracket for mounting Enclosure PN 5856
• Overall Size: 21.5" Long x 17" Wide x 0.95" High
• Material: Hot Rolled Mild Steel ASTM A1011 CS Type B Sheet
• Thickness: 14 Gauge
• Finish: Powder coated
• Color: Black
• Mounting to RV: Mounts to I-Beam or Chassis with 6 Self tapping Screws, included (see below HW)
• Mounting to Enclosure: 4 point anchor support at enclosure 'wings' using 3/8" HW, included (see below HW)
• Mounting Hole Matrix: 20.5" front to back; 15.4" side to side

HARDWARE (INCLUDED)
• Self Tapping Screws, Hex Head, 1/4" x 3/4" Length, Qty 6 (pre-drilling of pilot hole required)
• Tap bolts, Hex Head, 3/8" x 16 TPI, 4.5" Length, Steel Zinc plated, Qty 4
• Flat washers 13/16" OD, 13/32" ID. 0.065 Thick, Steel Zinc plated, Qty 24
• Lock Washers, External, 21/16" OD, 13/32" ID. 0.065 Thick, Steel Zinc plated, Qty 8
• Hex Nuts, 3/8" x 16 TPI, 0.325 Height, Steel Zinc plated, Qty 12
• Cap Nuts, External, 3/8" ID x 16 TPI, 0.51 Total Height, Steel Nickel plated, Qty 4
• Semi Flex Tubing, Black, 9/16" OD, 7/16" ID, 20" (cut as needed to cover exposed bolt shanks)
• Drop height adjustment range: From 0.95" Min: to 4" Max. (between I-Beam bottom to Enclosure top)

HOSE with NOZZLE ASSEMBLY and Female Cam Loc Fitting PN 5817

HOSE
• Length Extended : 20 Ft
• Length Collapsed: 5 Ft
• Extend to Retract Ratio: 4:1
• Dia.: 3"
• Max OD: 3.6" Over the Cuffs
• Wall Thickness: 25 Mil (0.025")
• Wall Material: Proprietary Co-Polymer Blend
• Construction: 'Stay - Put' Patented Technology, Helical Out-side - wall inside, no-wire, crushproof
• Helical Cross Section Dia.: 160 mil (0.160")
• Nozzle: Pre fitted, with Handle, Shut off valve and Clear view Fitting
• Donut: Included on Nozzle, Black

CAM LOC FITTING
• Type: Industrial Grade, Leak Proof Female fitting using Cam Loc Technology
• ID: 3.125" (fits over 3" ID plumbing)
• Length: 4.32" (without Cap)
• Length: 4.9" Max (with cap engaged measured over ring retainer boss)
• Max width across levers closed: 5.55"
• Max width across levers open: 9.7"
• Insertion depth over 3" ID Plumbing: 0.5" Min.
• Mounting method: ABS glue
• Cap: Male Cam Loc with Chain and Ring retainer included
• Sealing: Rubber gasket pre-installed in Female Cam Loc
• Material: ABS
• Color: Black
• Click to view: Cam Loc System Dimensions Doc. WM 78

SHIPPING (Whole Kit - Enclosure, Bracket with HW, Vent Assembly Kit and Waste Master Hose)
• Shipping Dimensions: 47" x 9" x 17" (ships cardboard wrapped)
• Shipping Weight: 28 Lbs

2nd Gen ENCLOSURE, MOUNTING BRACKET AND HOSE INSTALLATION INSTRUCTIONS

The links below provide a set of companion documents related to the Waste Master System installation.
Note: Vent Assembly Kit is not applicable in this installation.
Select the applicable documents and follow the instructions to complete the installation process.

WM81 Waste Master 2nd Gen Enclosure and Bracket Kit install instructions
WM88 Mounting Bracket Dimensions
WM89 Drop Height and HW configuration
WM74 Female Cam Loc fitting installation
WM78 Cam Loc System Dimensions

PDF Files open in a new window - view in browser or save for off-line viewing or printing

WM 5915 KIT OPERATION.

The 5915 Kit operation differs from other kits with Vent Assembly installed. With 5915 Hose extend and retract requires opening the hose nozzle partially for air entry and exit. To start, make sure all dump valves are closed, open the nozzle valve slightly, just enough to allow air entry. Tilt nozzle slightly up, care to avoid drips while extending the hose to the required length. Close the valve nozzle fully and plug into ground inlet then operate the nozzle valve as required for normal operation. Reverse the procedure to retract. The hose can be removed from the female Cam Loc fitting should the need arise for servicing or maintenance.

Just had my Sewer Drain System upgraded with a Drain Master (RV Waste Master System) in Hollister, CA. They performed a great custom fit on my 2016 Solitude 300GK. Their craftsmanship and attention to detail is next to none in this category. This will make our hook-ups and stops so much easier, as we travel throughout the country...
J. Gross in California